HTS single seat control valve is a top-guiding structure of the control valve. The valve body fluid channel is S-streamlined, with small pressure drop loss, large flow rate, wide adjustable range, high accuracy of flow characteristic curve, large guide area of the valve core and good vibration resistance. The control valve is equipped with multi-spring film actuator, which has compact structure and large output force. It can be used to control fluids of various pressures and temperatures.

Technical parameters and performance

Type Direct-through single-seat cast ball valve

Nominal diameter 40-200 mm

Nominal Pressure ANSI 125, 150, 300, 600

JIS 10, 16, 20, 30, 40K PN 1.6, 4.0, 6.4MPa

Connection type flange: FF, RF, RJ and LG

According to ANSI B16.5, JIS B2201

JB/T79.1 PN1.6 MPa, JB/T79.2

Concave-convex surface

Welding Type: Embedded Welding SW (40-50mm) Butt Welding BW (65-200mm)

Material HT200 ZG25 ZG1Cr18Ni9 ZG0Cr17Ni12Mo2 1.25Cr0.5Mo 5.0Cr0.5Mo SCPH21 SCPH61 Ti

Normal Temperature Type of Upper Cover (P): -17~+230 (?)

Elongation Type I (E1): - 45 ~ - 17 ~C, +230 ~+566 ~C

Elongation Type II (E2): Integral (E2I): -100-45 C

Welded (EW): -196-100 ~C

Cover type bolt compression type

Filler V-type PTFE filler, impregnated PTFE asbestos filler, asbestos braided filler.

In-valve assembly

The spool type up-steering single-seat plunger type spool.

Flow characteristics, high precision flow characteristics, refer to Fig. 2; high capacity flow characteristics, refer to Fig. 1;

Quick Open Characteristic: Quick Open Valve Core.

Working temperature and pressure difference of working range soft seat refer to Fig. 3

Reference 4 for working temperature and pressure difference of Stalley surfacing

Stalley surfacing of material 1Cr18Ni9Ti 0Cr17Ni12Mo2

Executive Body

Type HA Multi-spring Membrane Actuator

Ethylene-propylene rubber with nylon springs for diaphragm materials ranges from 0.02 to 0.10, 0.08 to 0.24 MPa with supply pressure of 0.14, 0.16 and 0.28 MPa

Gas source joint Rc 1/4

Ambient temperature - 30 ~ + 70 ~C

Note: VA5 or VA6 and VP actuators are also available for this valve.

Valve action type air-open, air-close.

Accessory positioner, handwheel mechanism, pneumatic valve position conveyor, etc.

Performance

Leakage Metal Seat: 0.01% of ANSI B16.104 IV Class, less than rated CV

PTFE Seat: Standard ANSI B16.104 VI, less than rated CV 10-7. Stalley surfacing seat, less than rated Cv 10-7 (quick-open spool)

Backlash 1% (with locator) 3% (without locator)

Linear (+1%) (+5%) (without locator). Note: Standard V-type PTFE filler is used.

Adjustable range 50:1